How to Properly Use Carpet Steamer?

If you are ashamed of your unwashed dirty carpet then using a carpet steam cleaner is the only solution. Steam cleaning helps your carpet to get rid of debris and stains and gives it a new life. Cleaning your carpet with a carpet steamer is easy only if you are well aware of its usage. Incorrect steps may cause damage to your expensive home décor.

Right steps to operate a carpet steam cleaner

Clear the floor:

Before you start cleaning your carpet, move all your furniture to another place. If you are having a wide area it will be easier for you to have your carpet cleaned via Tri country cleaning. In case of heavy furniture place a piece of wood blocks or wax papers under the legs to have them protected from the moisture.

Add hot water:

In case of light cleaning procedure with a rug steamer just add hot water. For deep cleaning, you are advised to add some cleaning solution or detergent in the water container. You will get various types of carpet soap and shampoo in the market out there.

Where to start:

Now when you have all the required accessories do not start without a perfect plan. Choose the corners to start the process of carpet cleaning Miami to have the entire carpet cleaned properly. This is because by the time you will lose energy and patience both to clean those annoying corners.

Let it dry completely:

After the cleaning procedure do not place the furniture back until it gets dry. Be extra cautious if you are having children. Make sure no one walks on the carpet before you allow the carpet to have plenty of time to dry.

These are some of the worth-mentioning steps that one must follow while using a carpet steamer. Please go through them thoroughly and have your carpet cleaned without any mess.

Carpet Steam Cleaning Tips for Dummies 2019

Carpet steam cleaning has been a trend for years now because of the way it makes carpets as clean as new compared to using an ordinary vacuum cleaner alone. It removes the remaining dirt and stains on the rug that the vacuum has left.

So, here’s a quick guide on how to use your carpet steamers at home properly. This is a life and money-saving hack that you can save a penny or two in cleaning them instead of availing services from the Tri-County Cleaning Services or even from Carpet Cleaning Miami.

In preparing your steam cleaner:

Fill your steam cleaner’s water tank with enough amount of hot water. Make sure that you won’t overfill it. Please be reminded also of the type of carpet that you own. With this knowledge in mind, you will be guided on how hot your water should be so it can’t be damaged.

Add the detergent. Use a detergent of some kind that is friendly to both of your machine and your rug. Put only the right amount of soap as directed, because using too much detergent might not be good for your rug. Pour the soap into the machine’s soap compartment (if your thing got one) or you can mix it directly with the water, it depends on the features of your machine. On the other hand, if you are that kind of person that is sensitive to chemicals used in making detergents, you can use vinegar as a substitute for it. Just so you know that vinegar is also great for cleaning.

And now, it’s all set in! Make sure that you have read and understood clearly the directions on how your machine works. There are machines that are meant to be pushed so it can lay the water on the rug that you are cleaning and then it will suck the dirt up when it is being pulled. However, there are some that work only either by pushing or pulling.

And that’s it. Hope that this article had been some help for you. Happy cleaning!

How Can I Use My Steam Cleaner Properly?

Let’s face it – nothing in our house stays absolutely clean. What’s even troublesome, is that you’ve recently purchased a new carpet or rug. Which makes this occurrence all the more problematic, because how in the world do you clean a carpet?

If you’re ever living in Miami, you know how hot and humid it gets most of the year. And when it gets hot, you turn on your air conditioning to cool you off – little did you know, that it’s a source of dust, which can seep into the depths of your carpet. But not only that – we have to factor in kids, pets, or guests who don’t take off their shoes before stepping on your precious carpet. You turn to the net for solutions on how to clean a carpet, and it just says: “use a carpet steamer”. Which brings us to our second most important question: How the heck do you use a carpet steamer?

Steam Cleaning is a process in which you are doing a deep cleaning of a carpet – removing dirt, dust mites, stains, and whatnot, to make your carpet sparkly clean. Below are the tips on how to use a carpet steamer properly:

  • Before you steam clean your carpet, you must remove furniture with areas to be steam cleaned underneath, or any obstacles that can be at risk of falling.
  • You must pick your steam cleaning detergents wisely: highly advised would be using an alkaline detergent to loosen dirt and other debris embedded in your carpet. It also cleans your carpets thoroughly.
  • You may also mix in an ammonia-based solvent so that the pH level is balanced.
  • Rinse the carpet and remove the dirty water by sucking it using a vacuum suction tool.

Here are some of the important notes for you to remember as well:

  • The steam cleaning process usually takes at least one hour or longer, depending on the size of your home.
  • Expect your carpets to be dry for about six to eight hours after steam cleaning them.
    • It also helps to ventilate your home by turning on your ceiling fan or opening your windows.
  •  Carpet cleaning isn’t a one-time deal. You must exercise in vacuuming it regularly, so your carpet won’t get dirty.
  • You mustn’t use scented carpet powders. Your carpet might smell great, but it’ll be harder to clean because of the dust that’ll accumulate.

Now that you’ve been enlightened on how to steam your carpet properly. You may now rest easy knowing that no matter how your kids, pets, guests, or whatever may mess up your carpet. You can easily maintain that sweet white carpet of yours.

Well—what’re you waiting for? That carpet ain’t gonna clean by itself!

How to get Chocolate Stain out of Carpet?

Carpet Cleaning East London, is a company specialized in carpet cleaning, end of tenancy cleaning and other related services. In this article, we would like to give some tips and advice on how to get chocolate stains out of the carpet. We all know that the carpet is so prone to all kinds of stains such as dust, oil, and paint. Carpet is prone to stains because it exposes to people as it is on the floor that keeps on walking every day.

Especially, if the house has kids carpet will get lots of stains. Kids always play and are not aware of what they are doing. Below are steps on how to get chocolate stains out of the carpet.

DIY Steps to Clean Chocolate Stains

First things first, is there is a stain in the carpet act on it right away. The longer it stays there the harder to remove chocolate stains from the carpet.

To remove the chocolate stains is to scrape excess chocolate. If the chocolate is a bit liquid it needs to let it hard by chilling it with ice cubes. When already hard, get a knife and scrape it. Put on a piece of paper and throw, after scraping kneed to clean the knife as well get rid of spreading the chocolate stains.

The next step is to check the kind of carpet, it is important to know the kind of carpet because it has certain cleaning technique needed. For instance, if the carpet is made of natural materials like grass, sisal, or wool can be damaged by too much liquid. If not sure what technique or kind of carpet you have better to call carpet cleaning experts.

In the earlier cleaning advice, it needs to test the carpet can’t bleach with carpet stain removal solution.

Firstly before cleaning the carpet, put a clean cloth over the chocolate stains with alcohol. Using a spoon press it, alcohol will take away the fat from chocolate that will make it a lot easier to remove the chocolate stained area.

Then use with the detergent soap clean the affected area. With the damp clean cloth and press it over the affected area.

Press the area to remove the extra liquid.

Put a clean white cloth to let the area dry, for quick dry put some weights over the clean white cloth.